Home > WING FOILS >

Overview

• The TBAR (mast + fuselage) is a single piece. We are on a monobloc bringing rigidity to the whole. No play, more dynamism and simplified maintenance!

• The full carbon construction brings rigidity and lightness to the foil (full foil weight: 3.1 kg). In the same way, you won't be bothered with marine aggressions such as corrosion that could weaken it.

• The Flyer range is available in 3 wing sizes (1000 cm2, 1300 cm2, 1500 cm2). Thanks to a single TBAR, you can fly between these wings but also on the wings of the Carver range.

• We control the manufacturing process from A to Z of our foils to ensure the best possible quality of manufacture. In addition, the prepreg construction allows operators to avoid breathing toxic fumes from the resin.
• The prepreg fibers are cut using a laser machine, then assembled in a mold and finally baked at a certain pressure to obtain the desired shape.

• This AFS Flyer allows you to practice WING FOIL, SUP FOIL, SURF FOIL or WINDFOIL.

• The Carver (top wing) also has a sister range, the Flyer range (bottom wing). These wings have a higher aspect ratio, they are more elongated.
• The Flyer (bottom wing) also has a sister range, the Carver (top wing) range.
• The Carver wings are very forgiving and maneuverable wings with a wider range of flight at lower speeds due to the longer chord of the wing.
• They offer excellent inertia which allows for low speed flying which makes it easier to practice, transitions, but does not mean less performance. Its accelerations are less frank than in Flyer and the pumping is smoother. This wing is just waiting to be carved.

•     The AFS dna, PERFORMANCE | QUALITY | RANGE OF USE, can be found in our wingfoil.
•     Ultra rigid canopy: profile stability due to good spinnaker tension
•     Low pressure stiffness : respect and hold of the profile with a medium inflation (6-7 psi)
•     3 enlarged handles: reduced weight, optimal hand placement
•     Construction: Dacro DP175LL/Spi Teijin T9669 - abrasion resistance and leading edge reinforcements

• The tension of the spinnaker has been maximized to obtain a wide range of use.
• This tensioned profile allows to generate a constant force to go in lightwind.
• The hollow of the WING is marked by an extra panel between the batten and the spinnaker. This will give you a direct feel and efficient pumping.

• The compact and stable profile allows you to jibe without worrying about your wing and surf without thinking about it.
• The variable leading edge diameter provides maneuverability and less bulk.
• A thicker leading edge in the center avoids any deformation of your WILF in high range or your jumps.
• A thinner diameter at the ends allows the WING to "breathe" to optimize fluid flow.

• We chose to have only three wide handles for optimal hand placement and a light wing.
• You can then position your hands as you wish to find the position that suits you.

• The spinnaker is the Teijin T9669, a reference in the world of kitesurfing, which provides extra strength.
•  Different reinforcements have been added on the leading edge to provide abrasion resistance.
• After various tests, the positioning of these reinforcements has been done in a practical and thoughtful way in order to have one of the lightest WING on the market.

• The multi-purpose board: Wing foil and Sup foil
• Compact shape: gain in reactivity and dynamism without losing in stability
• Balanced TOMO outline: stability at standstill and "Touch and Go" recovery
• Optimized hull : double concave on the front, flat on the back
• Multiple footstrap positions: choice of riding position on the foil, tight Y on the front

• Dedicated to uncompromising foiling. This new FLY comes with a full pad and a new shape. Perfect for WING FOIL, SURF FOIL or SUP FOIL !
• Compact and lightweight shape
• Lightweight and responsive, you can take your board anywhere you want.
• The "tomo" outline offers both stability on a short board, as well as a glide benefit before takeoff...

• The work of the hull is optimized thanks to a double concave on the front, evolving in flat on the back, which is the most efficient way to glide on these boards...

• The tail kick makes it easy to take off and pump at low speeds.

• OSS PVC Carbon
•  Starting at 5.7 kg, we follow a unique manufacturing process during which all layers of fabrics, reinforcements, and cases are applied in a double-shell mold, then baked following a process allowing an ideal polymerization of resins for a perfect reproduction and an optimal weight/strength ratio.
•  The resin used for the construction of our boards is a biosourced epoxy SR GreenPoxy (more than 33% of the molecules come from vegetable sources)
• The chamfer of the rails allows to soften the fingerboards when they are made with angle.

Movies