STARBOARD
Starboard Waterman Set ALUMINIUM
1489.00 €Unitary shipping : 39.00 €
Overview
FOIL STARBOARD - Waterman Set 2021
The Waterman Set is based on the SuperCruiser and includes parts that convert it!
The best selling Starboards foil of all time. Handy, smooth and a lot of fun, it's also our easiest foil to use. The 1700cm² front wing feels like it's floating on air and allows you to take off before you reach planing speed. The long 87cm fuselage offers extra stability and power.
Choose this foil if you want to foil in the lightest winds, do foil-jibes and 360s as easily as possible and foil with smaller sails.
Available in carbon and aluminum
MAIN FEATURES :
WINDSURF UK
"Its acceleration is creamy smooth. Just stand up over the board and let the foil do the work. It exudes confidence and oozes the essence of freeride foiling, being both eminently accessible and enjoyable.
By adapting the SuperCruiser to different boards and configurations, the ability to change the rear wing angle and thus the longitudinal inclination of the board is a real bonus, adjusting and refining the setup so that it is easy to establish the right balance.
The cruising speed is respectable, the steering is very stable and predictable, offering great comfort to cover distances effortlessly."
SLEEVE SYSTEM
The SuperCruiser uses the sleeve system to make it easy to put on and take off the wing. The front wing slides onto the fuselage and locks into place with four M6 countersunk Torx bolts. The threads are anodized and reinforced with stainless steel helixes for strength and corrosion resistance.
Will this fuselage work with other STARBOARD wings and masts?
The SuperCruiser fuselage is compatible with all Starboard Foils and all rear wings in the Wing and Wave collection. The only front wing technically compatible with the SuperCruiser is the Wave 1700 for SuperCruiser. See the Custom Shop section below for exceptions. Wings that use the saddle system are not compatible.
QUICK LOCK HD
The front wing slides onto the fuselage and locks into place with a quick half turn of the pressure bolt. The new HD version has an extra hole for a second bolt which provides extra security for heavy use.
Does this front wing work with other fuselages?
The Quick Lock HD front wings are compatible with Quick Lock HD fuselages and Quick Lock fuselages. They will not work with Wind Foil fuselages that use the harness system.
STABILIZER MOUNTING SYSTEM
The horizontal stabilizer sits on an adjustable rocker harness. Adjust the tail wing to the desired angle and then tighten the two bolts to lock it in place.
MORE LIFT, MORE NEUTRAL OR MORE SPEED?
ADJUSTING THE TAIL WING
As a general rule, more angle gives more lift, less angle gives more speed.
The ideal angle setting is one that allows you to ride with your weight evenly distributed between your front and back legs.
Once you have adjusted the rear wing angle to your liking, simply tighten the two bolts.
AVAILABLE IN CARBON AND ALUMINUM
Carbon:
The SuperCruiser Carbon comes with the 85cm Carbon mast. It is constructed with forty layers of uni-axial and bi-axial prepreg Toray carbon, hydraulically pressed, heated and fused into a monolithic mast of incredible rigidity. The mast shape was also optimized for bending and torsional stiffness. Computer simulation analysis shows that the Starboard mast, just by virtue of its shape, is already up to 52% stiffer than a traditional mast
Aluminium!
The Aluminum SuperCruiser comes with the V5 85cm Aluminum Pole. It is constructed from 6061 aluminum extrusion, a grade of aluminum we selected for its strength, weight and superior corrosion resistance. The V5 is extra-strong and extra-rigid, making it suitable for windsurfing foiling. Three oversized I-beams and five 12mm stainless steel bolts support the vertical loads. It is even stronger and stiffer than the aluminum V7 masts used for wing and wave foils.
IN A FEW WORDS:
Handy, smooth and super fun, it's also our easiest foil. The 1700cm2 front wing feels like it's floating on air and allows you to take off before you reach planing speed.
Choose this foil if you want to foil in the lightest winds, do foil-jibes and 360s as easily as possible and foil with smaller sails.
What does the Waterman set contain?
Front wing: Wave 1700 for SuperCruiser
Rear wing: 370 + RAZR 250
Fuselage: 87 + Quick Lock Fuselage 36 Front and tail piece
Mast: Carbon 85cm or Aluminum V5 85cm Deep Tuttle
Other items: Top plate adapter, 1x Torx wrench and a set of bolts to assemble the foil.
The SuperCruiser Carbon is delivered with the Team XXL bag, the Aluminium version is delivered without bag.
For the wing foil, a Top Plate adapter is included in the Waterman Set. Keep in mind that the mast length will become 92cm.
For extra protection, Starboard Foils wing covers and Starboard Foils team bags can be purchased separately.
Recommended team bag size:
XXL - 107cm x 37cm x 16cm
Recommended Wing Cover Set: SuperCruiser Set
Activity :
Windsurfing Foiling: Yes
Wing Foiling: Yes (a Top Plate adapter may be required)
Wave Foiling: No
Wake Foiling: NO! Featured