Complete FREERIDE / SLALOM pack, ideal to get back to windsurfing with a high performance and extremely fast board!
Everything is easy .... Navigation, starting and even rigging are child's play!
If this pack proposal does not suit you perfectly,
Don't forget that you can modify your pack by choosing the options that suit you in order to upgrade your mast, boom or equipment !
All CarveIQs are designed with a thin profile, an innovation from Starboard introduced in 2010. The advantage of such a slim profile is a lower center of gravity on the water, for more sportiness, more stability, more control and more responsiveness.
- For advanced riders: choose your board model according to the width you want. Less width will mean that
Less width means that your thin board will have less volume and less weight on the front, therefore more control. A thin board is more responsive and
responsive.
- For those who are just starting out: choose your model according to the volume. A thin board will be wider for the same volume, which will give you more stability.
The Starboard Carve IQ is a freeride board with a Plug and Ride concept! It has very good performance and minimal stress. Its wide and rounded tail provides great stability at high speed and also a good capacity to go upwind. The board is quite thin and has a low center of gravity, which makes it sporty and responsive. Starlite construction.
The 114 compared to the AtomIQs: 8cm shorter for better control and responsiveness.
Wider rear end for more power in the rear foot.
Deeper concaves for more grip. More V for better jibing and comfort in the chop.
These models are much shorter: they offer more control in strong wind, which also makes them more responsive and maneuverable.
The stern is wider, which also makes them more stable at higher speeds, while giving them more power to go upwind: their range of use is thus ultimately widened. To further improve their jibing behavior and their liveliness at full speed, we have accentuated the V under the entire hull.
The nose is more rounded to limit the weight on the nose of the board, without influence on the ease of planing.
This offers the added benefit of better control in strong winds, but also a more lively feel to these boards underfoot.
The SEVERNE CONVERT 2020 is 100% reinforced for 100% resistance!
Labeled by Severne as their "value-added freeride" offering, the name of the Convert gives a good idea of the purpose and intent of the board - to get the user into the world of windsurfing and make sure they are hooked for life!
Designed with the primary goal of being easy to use, the Convert's most striking visual attribute is the large Dacron panel that radiates from the clew, expanding as it spreads across the sail.
Rigged on 100% 460 SDM, it is certainly easy to rig, requiring very little tension to satisfy its minimal luff curve.
Dacron is also present in the Convert's luff panel, while the rest of the sail's panels are made of widely spaced X-ply.
Set at the specified increments, the two lower battens rest with a lot of rotation around the mast, as the tension falls evenly towards batten four. At rest, it has a small shape under the boom, but remains flat and neutral above the boom.
The construction is clean and simple, with a real sense that features are suppressed unless they add cost-effective value. Integrated batten pockets and a seamless foot panel are adopted over unnecessary graphic niceties and ruffles, for example.
"The Convert is packed with features, including a lowered clew for shorter, more manageable boom lengths. The shape and geometry are designed for a balanced, stable feel and forward pull for a relaxed, easy stance.
With a luff of 466 cm, the Convert with its very upright and straight stance exposes it to the wind in the best possible way to capture all the power possible.
Add to that the minimalist luff curve and the Convert comes to life early and with gusto once there is enough pressure.
Movies
Review
Pack composé de :
Flotteur sTARBOARD IQ CARVE 2019
Voile SEVERNE CONVERT 2020
Mat DUOTONE EPX 25% RDM ou SDM suivant les tailles de voile
Wishbone DUOTONE EPX Alu 160/210 ou 180/230 suibvant les voiles