Home > WINDSURF > >

MAST RDM/SDM : 4,6/5,0/5.5/6.2/7.0/7.8

MAST SDM : 8.6/9.4

The OverDrive focuses on maximum reaching speed with increased twist and less back-hand pressure. A lighter weight means improved handling characteristics.

 

A moderate width sleeve, 7 battens and 3 cams provide dr ft stability through a huge wind range. Combined with a higher aspect ratio, the OverDrive M3 has impeccable handling characteristics; a lightweight feel, with softer flex.

 

Smaller sizes (5.5 and down) have 6 battens to increase flex and control for when conditions get extreme.

 

The OverDrive M4 benefits directly from advances made on the Mach4 development. Higher aspect ratios and increased leverage add to the efficiency. Flow aligned battens further improve aerodynamics. The resultingperformance is explosive acceleration and big numbers on the GPS.

 

The OverDrive M4 can be run on either RDM masts or SDM masts.

 

KEY DIFFERENCES BETWEEN THE MACH4 AND OVERDRIVE M4

 

/ SLEEVE WIDTH: 33% NARROWER THAN MACH4 FOR LOWER WEIGHT AND LESS WATER RETENTION.

/ BOOM LENGTH: APPROX. 10CM SHORTER ON MOST SIZES FOR LESS BACK-HAND PRESSURE.

/ LIGHTER, SOFTER FEEL

 

CONSTRUCTION NOTES

/ MONOFILM BODY – MAXIMUM STABILITY AND PERFORMANCE

/ KEVLAR X-PLY LUFF SLEEVE – MINIMAL VERTICAL STRETCH WITH HORIZONTAL ELASTICITY

/ TUBE BATTENS – HIGH PERFORMANCE STABILITY